OSW1×64 RS232 SM optical fiber switch
Introduction of OSW 1*64 optical fiber switch
Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Applications of SM optical fiber switch
- Optical Network
- Protection Switching
- Reconfiguration
- Optical Systems
Specifications
| Parameters |
Unit |
OSW1×64 |
| Wavelength Range |
nm |
850±40 / 1300±40,MM |
1260 ~ 1650 SM |
| Test Wavelength |
nm |
850 / 1300,MM |
1310 / 1550 SM |
| Crosstalk |
dB |
≥ 70 |
| PDL |
dB |
≤ 0.05 |
| WDL |
dB |
≤ 0.25 |
| TDL |
dB |
≤ 0.25 |
| Repeatability |
dB |
≤ ±0.05 |
| Durability |
Cycles |
≥ 10 Million |
| Switching Time |
ms |
≤ 10(Sequence switch time of adjacent channel) |
| Optical Power |
mW |
≤500 |
| Operating Temperature |
℃ |
-5 ~ +70 |
| Storage Temperature |
℃ |
-40 ~ +85 |
| Relative Humidity |
% |
5 ~ 95 |
Pin Configurations
RS232 DB-15 male connector
| Pin No. |
Signal Name |
I / O |
Description |
| 2 |
Sout |
Output |
RS232 data Tx |
| 3 |
Sin |
Input |
RS232 data Rx |
| 5 |
Sgnd |
Input |
RS232 Ground |
| 8 |
+5VDC |
Input |
5.0±5% VDC Power Supply (max 800mA) |
| 9 |
GND |
Input |
Ground |
|
1,4,6,7,10, 11,12,13,14,15
|
NA |
|
|
Serial port settings: 9600 baud rate, 8 bit data bits, 1 bit stop bits, no parity check.
Optical Route

Ordering Information: 7202-1×64L-R-A-B-C-D-E-F-G
Example:7202-1×64L-R-SM-FS-5-90-12-02M-FA
| A |
B |
C |
D |
E |
F |
G |
| Fiber Type |
Test Wavelength |
Operating Voltage |
Tube Type |
Fiber Length |
Dimension |
Connector |
|
SM: SM, 9/125
M5: MM, 50/125
M6: MM, 62.5/125
X: Others
|
85: 850±40nm
O: O band(1260~1360nm)
C: C band(1530~1565nm)
L: L band(1565~1625nm)
U: U band(1625~1675nm)
FS: 1260~1650nm
|
5:5V |
25: 250um
90: 900um
20: 2mm
30: 3mm
X: Others
|
05: 0.5m±5m
10: 1.0m±5m
12: 1.2m±5m
15: 1.5m±5m
X: Others
|
01: 135×40×32-DB9
02: 135×60×32-DB9
X: Others
x=F:female M:male
|
OO: None
LP: LC/PC
LU: LC/UPC
LA: LC/APC
FP: FC/PC
FU: FC/UPC
FA: FC/APC
SP: SC/PC
SU: SC/UPC
SA: SC/APC
STP: ST/PC
STA: ST/APC
X: Others
|
Our Advantage:
1. Manufacturing: We are a powerful factory and has been in this industry about 10 years
2. Professional R&D center: We have a professional and independent R&D team. Most our engineers have more than 5 years experience.
3. Fast dispatch: Most of the products are in stock. Below 10pcs can arrange delivery with 3 years.
4. Small order accepted: Low MOQ accepted. 1pcs are availabel.
5. Insurance: all products 3 years warranty.