OSW1×12 RS232 SM optical fiber switch
Introduction of OSW 1*12 optcial fiber switch
1×12 Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Product Features of RS232 optical switch
·Low Loss and High Reliability
·RS232 Interface
·Modularized Design
·Epoxy-free on Optical Path
Applications of SM optical fiber switch
·Ring Network
·Remote Monitoring in Optical Network
·Testing of Fiber, Optical Component
Specifications
| Parameters | Unit | OSW1×12 | |
| Insertion Loss | dB | ≤ 1.0 | |
| Wavelength Range | nm | 850±40 / 1300±40,MM | 1260 ~ 1650 SM |
| Test Wavelength | nm | 850 / 1300,MM | 1310 / 1550 SM |
| Return Loss | dB | MM ≥ 30 SM ≥ 50 | |
| Crosstalk | dB | ≥ 70 | |
| PDL | dB | ≤ 0.05 | |
| WDL | dB | ≤ 0.25 | |
| TDL | dB | ≤ 0.25 | |
| Repeatability | dB | ≤ ±0.05 | |
| Durability | Cycles | ≥ 10 Million | |
| Switching Time | ms | ≤ 10(Sequence switch time of adjacent channel) | |
| Optical Power | mW | ≤500 | |
| Operating Temperature | ℃ | -5 ~ +70 | |
| Storage Temperature | ℃ | -40 ~ +85 | |
| Relative Humidity | % | 5 ~ 95 | |
| Dimension | mm | 135×40×32 | 135×60×32(regular size) |
Pin Configurations
RS232 DB-9 female connector (max.1×16)
| Pin No. | Signal Name | I / O | Description |
| 2 | Sout | Output | RS232 data Tx |
| 3 | Sin | Input | RS232 data Rx |
| 5 | Sgnd | Input | RS232 Ground |
| 8 | +5VDC | Input | 5.0±5% VDC Power Supply (max 800mA) |
| 9 | GND | Input | Ground |
| 1,4,6,7 | NA |
Optical Route
Dimension(female head is defined as the actual mark of the element)
Ø 02: 135×60×32-DB9 (N≤16, DB-9 male)
Ordering Information: 7202-1×12L-R-A-B-C-D-E-F-G
Example:7202-1×4L-R-SM-FS-5-90-12-02M-FA
| A | B | C | D | E | F | G |
| Fiber Type | Test Wavelength | Operating Voltage | Tube Type | Fiber Length | Dimension | Connector |
|
SM: SM, 9/125 M5: MM, 50/125 M6: MM, 62.5/125 X: Others |
85: 850±40nm O: O band(1260~1360nm) C: C band(1530~1565nm) L: L band(1565~1625nm) U: U band(1625~1675nm) FS: 1260~1650nm |
5:5V |
25: 250um 90: 900um 20: 2mm 30: 3mm X: Others |
05: 0.5m±5m 10: 1.0m±5m 12: 1.2m±5m 15: 1.5m±5m X: Others |
01: 135×40×32-DB9 02: 135×60×32-DB9 X: Others x=F:female M:male |
OO: None LP: LC/PC LU: LC/UPC LA: LC/APC FP: FC/PC FU: FC/UPC FA: FC/APC SP: SC/PC SU: SC/UPC SA: SC/APC STP: ST/PC STA: ST/APC X: Others |
Packing List
· 1pc optical fiber bypass switch
· 1pc user manual
· 1pc warranty card
FAQ:
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.
Q3: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
