5 port 10/100/1000Mbps unmanaged Industrial ethernet Switch
Introduction of 5 port Industrial Fiber Media Converter
IM-FS140GE series is the 10/100/1000Mbps industrial fiber switch, operating temperature-40 ℃ to + 85 ℃, support wide voltage dual power input, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.
Specifications of 10/100/1000Mbps Ethernet Switch
| Product Name |
10/100/1000Mbps Industrial Fiber Media Converter (4TP+1F) |
| Model No. |
IM-FS140GE
|
| Port |
1 x 1000Mpbs port
4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
|
|
Single-mode
|
20, 40,60, 80,100,120Km,optional
|
|
Multi-mode
|
550m
|
| Transmission mode |
storage and forward
|
| System bandwidth |
40Gbps (non-traffic jam) |
| Network media |
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤10meter)
1000BASE-TX: Cat6 or later UTP(≤100 meter)
|
| LEDs |
Power, network, fiber |
| Power supply |
Input voltage:DC 9-52V
|
| Reverse connection |
support |
| No-load power |
5W |
| Safety |
CE Mark ,commercial
CE/LVD EN60950
|
| Mechanical information |
Shell:Corrugated metal shell
Safety class:IP40
Dimension: 113.8 x 93 x 34.9mm
Mounting method:Din-rail mounting
|
|
Flow Control
|
Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
|
|
Application
Production steps
- Welding: Weld the necessary components
- Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
- Assembling: Builds up components of a product, like panels, screws, PCB boards.
- Testing: To make sure the product is basically working fine after assembling
- Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
- Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
- QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
- When all above is done, the product will go to market.
Advantage of our company :
1. National High-tech enterprise certification;
2. Fiber Optical Innovative &production team Over 10 years;
3. Fiber optical active and passive components production Workshop;
4. Strict quality management system;
5. Professional One stop supply & service;
6. OEM&ODM available;
7. Reliable and Timely customer services;
