MEMS OSW1×N OADM OXC optical switch
Introduction of OSW 1*4 optical fiber switch
MEMS OSW1×N Optical Switch is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
Product Features of MEMS optical switch
·Wide Wavelength Range
·Low Crosstalk
·High Stability, High Reliability
·Epoxy-free on Optical Path
Applications of optical fiber switch
·R&D in Laboratory
·System Monitoring
·OADM
·OXC
Specifications
| Parameters | Unit | MEMS OSW1×4&1×8&1x16 | ||
| Wavelength Range | nm | MM 850±20 | MM 1400~1700nm | SM 1310±20/1550±20/1625±20 |
| Test Wavelength | nm | MM 850 | MM 1550 | SM 1310/1550 |
| Insertion Loss 1, 2 | dB |
0.8(TYP) 1.0(MAX) N≤8 1.0(TYP) 1.6(MAX) N≤16 |
0.8(TYP) 1.0(MAX) N≤8 1.0(TYP) 1.5(MAX) N≤16 |
|
| Return Loss 1, 2 | dB | MM ≥ 25 | SM ≥ 40 | |
| Crosstalk 1 | dB | MM ≥ 30 | SM ≥ 45 | |
| PDL | dB | ≤0.15 | ||
| WDL | dB | ≤0.3 | ||
| Repeatability | dB | ≤0.1 | ||
| Durability | Cycles | ≥109 | ||
| Switching Time | ms | ≤20 N≤8 , ≤30 N≤16 | ||
| Switch Mode | Non-latching | |||
| Optical Power | mW | ≤500 | ||
| Power Supply | V | 5±0.2 | ||
| Operating Temperature | ℃ | -5 ~ +70 | ||
| Storage Temperature | ℃ | -40 ~ +85 | ||
| Relative Humidity | % | 5 ~ 95 | ||
| Dimension | mm | TYPE B: (L)65×(W)24.7×(H)11 ±0.2 | ||
|
Note: 1 Within operating temperature and SOP. 2 Excluding connectors. |
||||
Optical Route
Pin Assignment
TTL/UART
| Pin | Name | Description | I/O | specification | Unit |
| 1 | NC | Not Connected | |||
| 2 | VCC | Power Supply | IN | 5±0.2 | VDC |
| 3 | /STROBE | Strobe signal, Falling Edge Active | IN | LVTTL | |
| 4 | GND | Ground | IN | ||
| 5 | D0 | Data0 Input | IN | LVTTL | |
| 6 | D1 | Data1 Input | IN | LVTTL | |
| 7 | D2 | Data2 Input | IN | LVTTL | |
| 8 | NC | Not Connected | |||
| 9 | TXD | UART transmit | OUT | LVTTL | |
| 10 | RXD | UART receive | IN | LVTTL | |
| 11 | GND | Ground | IN | ||
| 12 | NC | Not Connected | |||
| 13 | D3 | Data3 Input | IN | LVTTL | |
| 14 | /RESET | Hardware Reset, Logic Low Active | IN | LVTTL |
Package Type B Tube Type:900um, N≤16
Dimension
Package Type B Tube Type:900um, N≤16
Ordering Information: 7203-A-B-C-D-E-F-G-H-I
Example:7203-1×4M-T/U-SM-FS-5-90-10-02-FA
| A | B | C | D | E | F | G | H | I |
| Osw type | Control type | Fiber Type | Test Wavelength | Operating Voltage | Tube Type | Fiber Length | Dimension | Connector |
|
1×NM N=4 N=8 N=16 |
T: TTL U: Uart T/U: TTL/Uart I: I2C X: Others |
SM: SM,9/125 M5: MM,50/125 M6: MM,62.5/125 X: Others |
85: 850±40nm O: O band(1260~1360nm) C: C band(1530~1565nm) L: L band(1565~1625nm) U: U band(1625~1675nm) FS: 1260~1650nm FS2: 1400~1700nm X: Others |
5: 5V |
25: 250um 90: 900um 20: 2mm 30: 3mm X: Others |
05: 0.5m±5m 10: 1.0m±5m 12: 1.0m±5m 15: 1.5m±5m X: Others |
02: (L)65×(W)24.7×(H)11±0.2mm X: Others
|
OO: None LP: LC/PC LA: LC/APC FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC STP: ST/PC STA: ST/APC X: Others |
Packing List
· 1pc optical fiber bypass switch
· 1pc user manual
· 1pc warranty card
Q1. Can I have a sample order for optical fiber switch?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
Q3. Do you have any MOQ limit for optical fiber switch order?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
