OLP: Optical Line Protection Card

Demandez maintenant
Obtenez une citation
Caractéristiques
Fonction:
Gamme de longueurs d'onde fonctionnante
Description:
1260nm~1650nm
Fonction:
TYPE OLP
Description:
OLP-1:1, OLP-1+1, OLP-1-1, OLP-BIDI
Fonction:
Temps de commutation
Description:
<35 ms (1:1), <15 ms (1+1/1-1/BIDI)
Fonction:
Perte d'introduction (port Tx)
Description:
<1,3dB (1:1/1-1/BIDI), <4dB (1+1)
Fonction:
Perte d'introduction (port Rx)
Description:
<1,3dB (1:1/1-1/BIDI), <1,2dB (1+1)
Fonction:
Surveillance de la puissance optique
Description:
-50 dBm ~ +23 dBm
Fonction:
Scènes d'application
Description:
Protection de la ligne optique 1+1
Fonction:
Gestion du réseau
Description:
prend en charge la surveillance en temps réel de la puissance optique OLP, la planification active d
Fonction:
Numéro d'emplacement occupé
Description:
Prend en charge le châssis de la série OSP3800, occupe 1 emplacement (0,5RU)
Fonction:
Interface optique
Description:
LC/CUP
Fonction:
Consommation d'énergie maximale
Description:
5W
Fonction:
MTBF
Description:
heures >100000
Description de produit
OLP Optical Protection Card The OLP optical protection card is designed to assist wavelength division systems in completing critical optical layer protection solutions, including optical line 1+1/1:1 protection and optical wavelength 1+1/1:1 protection. By monitoring primary and backup routing paths in real-time, it ensures rapid signal recovery through automatic switching during fiber degradation or blockage. Real-time Monitoring: Continuous tracking of primary and backup
Produits connexes
Envoyez une demande